Customer ReviewsforHi-Tech Energy Windows Ltd

Quality ,look ,proffesional ,knowledgeable company ! Right from quote with Tom to install ,perfect .Im very pleased .They were prompt , proffesional and skilled .MB made to order ! I’d purchase from them in the future .Best windows in the market .Thank you Tom

Thank you, Tracy for your review. Hi-Tech Energy Windows Ltd. Is delighted to have had the opportunity to provide you with quality windows.

******* ************* Insisted window drip edge is not standard and if we had one they would have replaced. Had them fix the first window that leaked. Second window leaks and opened it up ourselves. They cut off our old drip edge. *** ** **** **** There are massive gaps between house and windows, water has been getting in and damaged. Warranty is ******* if the same ******* installers do the fix. Paying someone else to correct their work ** ** *** ***** ** **** ******* ** **** ****** I have video of water streaming in my house, and pics of the poor installation if anyone needs proof. ** *** ** *** **** **** ***** ******* **. Said our old windows must have leaked, why else would we have replaced them? Should have kept the old wood frame windows, ****** ********* **** ** **** ****** **** ***** *** ***** *********

Hi Candice, In February 2021, removed & re-installed one window. At the time of installation, we informed the homeowner that there was a pre-existing water leak from above the window (on the back side of the dry wall), an issue that existed before our window installation. The pre-existing water infiltration (above the window) may have been due to the ice damming on the homeowner's roof. The window was re-installed, and our team informed the homeowner to contact us directly if they had any other issues. We have not received any correspondence from this homeowner regarding any issues with their windows. We stand behind our warranty for our windows and installation work. Please contact our Operations Manager, Sean at ***** ******** to address this accordingly

***** ***** *** yes, your installers had to reinstall my dining room window, which did not have water damage prior to replacement. When the installers repaired, they still refused to replace the drip edge, so we had that completed on our own. We tried to have it completed by your installers but they refused, and when contacting our salesperson and your reception, they also refused to correct. The uploaded video is of my living room window, which also didn’t have damage prior to installation of new window. Both windows had the old drip edge cut off by the installers, and no new drip edge replaced by installers. As I said in my review, I’ve already had the leaks fixed and new drip edges installed. *** ***** ** ***** ** **** ********** **** ******* ****** **** *** ***** **** *** *** ************** ********* * ***** *** ***** ** ** *** *** ****** *** ** **** **** ************* *** * **** **** **** ** *** ******* ***** **** ********** ***** **** ******** *** **** ***** **** ********  **** ****** ***** ***** *** ***** *** **** **** ******* ** ** ** **** ****** ********** ** ****** ************ *** **** ******** ******** 

We decided to get Hi-Tech Energy Windows and Doors to replace our exterior door (this was February 2021). The door was installed June 15, 2021. At install time I was told they could not use my existing storm door, so we purchased one from them and they installed it. On November 17, 2021 it was windy and I could hear a noise at the door. When I went to check it out I noticed the Pneumatic closer on the storm door had ripped away from the frame leaving a big hole and the screws Hi-Tech had used to fasten it were only about ¼" long so they only penetrated the door casing only (not into the frame of the house) causing the damage. I sent pictures to them the next day and was told "We will be getting a plate made to go over that piece and then the storm door can screw into that. We will paint the plate white to match the frame. The plate will cover the whole broken area, that's why I want (employee) to come out and take measurements just to make sure we get the right size and just for him to go and have a look to see if there could be another option to possibly do, but if not, the plate is the suggestion my manager said". They came out to assess the damage on December 2nd. From January to May 2022, I tried to get an answer as to when they were coming to do the repair. I was given the runaround and finally in April I was told "product is ordered and he just needs to get it powder coated". They finally came out June 8, 2022 to do the repair. They had put a metal patch over the hole, and it didn't even cover the whole hole. That night I sent them an e-mail with the pictures of the repair with the message Letting them know we weren't happy and we want this to look like the new door it is and not something we got second hand. On July 27th 2022 I sent my last e-mail to Hi-Tech. So here we are in August 18 and no reply from anyone at HiTech . In total trying to get this repair done has encompassed 43 e-mails and I have had enough! I am going to do the repair myself !

Hello Cal, the storm door that was installed was installed with the hardware and screws supplied by the manufacturer of the storm door. If the storm door was not properly closed it is possible for high winds to do damage to the storm door and existing door frame. This is not a warranty issue, it is more of an insurance claim. It was discussed with the customer that we could put a steel plate on the door frame to make the door operational but there is no way to make the door look like new. This plate was made and installed at no charge to the customer. To make a permanent fix the whole door system would need to be taken out and have the damaged door frame replace at the Hi-Tech manufacturing plant and then reinstalled into the customer's home. There would be a charge for this work to be done. This is standard practice in our industry.